top of page
Anchor 1

MILITARY SPEC. PAINTS:

I) EPOXIES:

 

MIL-PRF-4556: Epoxy Coating Kit for Interior of Steel Fuel Tanks

Description: This epoxy coating consists of a two-component epoxy light yellow primer and a two component white topcoat specifically formulated to use on the interior surfaces of steel tanks used for transportation and storage of military fuel and oils without contributing to contamination of the cargo. The coating, furnished as a kit, is lead and chromate free having a maximum VOC of not more than 2.80 lbs/ gal. (340 g/l) at application.

 

Conformance:  This product conforms to MIL-PRF-4556 Revision F (the latest revision).

MIL-PRF-4556

Technical Data Sheet

 

 

MIL-PRF-22750: High Solids Epoxy Coating

 

Description: Milguard-22750 is a two part VOC compliant epoxy polyamide based coating specifically formulated for protection of areas exposed to chemicals and solvents. It is intended to be used as a topcoat for exterior or interior use on aircraft and ground support system. It is also lead and chromate free.

 

Conformance:  This product conforms to MIL-PRF-22750 Revision G, Type I, Class H, Grade A / B. Previous revisions may be available. Contact us for details.

 

MIL-PRF-22750 (Gloss)                                       MIL-PRF-22750 (Semigloss & Lusterless)

Technical Data Sheet                                         Technical Data Sheet

MIL-PRF-23236: Coating Systems for Ship Structures

 

Description: Milguard-23236 is a two part epoxy polyamide based lead and chromate free coating specifically formulated for application over prepared surfaces subjected to industrial, marine, offshore and other corrosive chemical environments.

 

Conformance:  This product conforms to MIL-PRF-23236 Revision D (the latest revision), Type V, Class 5 or 7. Previous revisions may be available. Contact us for details.

MIL-PRF-23236

Technical Data Sheet

 

MIL-PRF-23377: High Solids Epoxy Primer

 

Description: Milguard-23377 is a two component, high solids, VOC compliant epoxy polyamide primer with excellent chemical, solvent and corrosion resistance suitable to be used on aluminum, steel and galvanized substrates.

 

Conformance:  This product conforms to MIL-PRF-23377 Revision K (the latest revision).  Type I, and Class C2 & Class N, in Yellow or Green are available. Previous revisions may be available. Contact us for details.

 

MIL-PRF-23377

Technical Data Sheet

MIL-DTL-24441 TYPE III & TYPE IV: Epoxy Polyamide Paint

 

Description: This specification covers a series of primers & paints that are epoxy polyamide, two component, and lead and chromate free. They are recommended to be used for painting both land and marine structures and protect structures from environmental attack.

 

Conformance:  This product conforms to MIL-DTL-24441 Revision D (the latest revision). 

MIL-DTL-24441 Formula 150 Type III

MIL-DTL-24441 151 – 158 Type III

MIL-DTL-24441 159 Type III

 

 

MIL-DTL-24441 150 Type IV

 

MIL-DTL-24441 151-162 Type IV

 

MIL-P-24441 TYPE I: Epoxy Polyamide Paint

 

Description: This specification covers a series of primers & paints that are epoxy polyamide, two component, and lead and chromate free. They are recommended to be used for painting both land and marine structures and protect structures from environmental attack.

MIL-DTL-24441 150 Type I

 

MIL-DTL-24441 151 – 158 Type I

Conformance:  This product conforms to MIL-P-24441 Revision B.

 

MIL-DTL-24631: Paint for Submarines (Formula 184, 186, & 187)

 

Description: This specification covers a series of epoxies and a polyurethane for use on submarines.

 

Conformance:  This product conforms to MIL-DTL-24631 Revision A.

MIL-DTL-24631 Formula 184 

 

MIL-DTL-24631 Formula 186

 

MIL-DTL-24631 Formula 187

 

MIL-DTL-53022: Corrosion Inhibiting, Lead & Chromate Free Epoxy Primer

Description: Milguard-53022 is a corrosion inhibiting, lead and chromate free primer. This epoxy polyamide coating is intended for use on properly cleaned and pretreated ferrous and non-ferrous substrates to provide corrosion and chemical resistance.

 

Conformance:  This product conforms to MIL-DTL-53022 Type II, Revision E (the latest Revision). Previous revisions may be available. Contact us for details.

 

MIL-DTL-53022

Technical Data Sheet

II) POLYURETHANES:

 

MIL-C-46168: Chemical Agent Resistant Aliphatic Polyurethane Coating

 

Description:  MIL-C-46168 is a two component, lead & chromate free, polyester/aliphatic polyurethane coating for use as both a camouflage and non-camouflage finish coat on military combat equipment.

 

Conformance:  This product conforms to MIL-C-46168 Rev. D, Type-II

 

MIL-C-46168

Technical Data Sheet

MIL-PRF-85285: Polyurethane Coating for Aircraft and Support Equipment

 

Description:  A two component, VOC compliant, polyester/aliphatic polyurethane coating that is intended for use on aircraft weapons systems and other applications.

 

Conformance:  This product conforms to MIL-PRF-85285 Rev. E (the latest Revision), Type I or Type-II, Class H. Conformance to previous revisions of MIL-PRF-85285 and MIL-C-85285 may be available. Contact us for details.

 

MIL-PRF-85285 (Gloss Colors) 

 

MIL-PRF-85285 (Semigloss or Flat Colors) 

 

III) SINGLE PART PRIMERS:

 

TT-P-645 REVISION B: Zinc Molybdate Alkyd Primer, Paint, Formula #84, Yellow

 

Description: This product is a one component, corrosion inhibitive, zinc-molybdate, alkyd primer for application to steel and aluminum surfaces particularly in marine services. This yellow primer is suitable as an after blast or after pickling primer for plating, as an undercoat for alkyd enamels, and for equipment where a quick drying primer is not required. It has a maximum VOC of 2.80 lbs./gal. or 340 g/l.

 

Conformance:  This product conforms to TT-P-645 Revision B.

 

TT-P-645 Revision B

Technical Data Sheet

TT-P-645 REVISION C: Paint, Alkyd Type, Formula #84, Green

 

Description: This product is a one component corrosion inhibitive, alkyd primer for application to steel and aluminum surfaces particularly in marine services. This green primer has a maximum VOC of 2.08 lbs/gal. or 250 g/l.

 

Conformance:  This product conforms to TT-P-645 Revision C.

TT-P-645 Revision C

Technical Data Sheet

 

 

 

TT-P-664: Corrosion Inhibiting, Lead & Chromate Free, VOC Compliant, Alkyd Primer Coating

 

Description: It is a quick drying, rust inhibiting, high solids, alkyd base primer recommended for application on pretreated ferrous and non-ferrous metals. This VOC compliant primer is lead and chromate free, and is suitable for use under synthetic enamel or lacquer topcoats.

 

Conformance:  This product conforms to TT-P-664 Revision D.

TT-P-664

Technical Data Sheet

 

 

PRIMEGUARD-1757 Fast Dry Rust Inhibitive Alkyd Primer

 

Description: This product is a one component, VOC compliant alkyd based primer intended primarily for use as corrosion-inhibiting primer on aluminum and aluminum alloy structures and surfaces and on substrates coated with a pretreatment coating conforming to MIL-C-8514 or DOD-P-15328.

 

Conformance:  This product conforms to Federal Specification TT-P-1757 REV B, Type (I or II)

Class -C       Chromate Based Corrosion-Inhibitors

Class- N       Non-Chromate Based Corrosion-Inhibitors

Color -Y       Deep Yellow

Color -T       Green (Fed-Std-595, Color # 34151)

TT-P-1757

Technical Data Sheet

MIL-C-8514: Metal Pretreatment Coating Compound

 

Description: This metal pretreatment coating compound is a two-component, quick dry etch primer designed for use on aluminum, galvanized steel, and ferrous substrates to ensure good adhesion of subsequent primer coats. The coating compound is not intended to be used as a permanent protective coating in itself.

 

Conformance:  This product conforms to MIL-C-8514, Revision C.

 

MIL-C-8514

Technical Data Sheet

DOD-P-15328: Pretreatment Wash Primer (Formula No. 117 for Metals)

 

Description: This pretreatment wash primer is a two-component, quick dry etch primer designed for use on aluminum, galvanized steel, and ferrous substrates to ensure good adhesion of subsequent primer coats. The wash primer is not intended to be used as a permanent protective coating in itself.

 

Conformance: This product conforms to DOD-P-15328 Revision D. Conformance to previous spec MIL-P-15328 Revision C is also available.

 

DOD-P-15328

Technical Data Sheet

DOD-P-15328 (Chromate Free): Pretreatment Wash Primer (Formula No. 117 for Metals)

 

Description: Our Simflex-118 pretreatment wash primer is a two-component, quick dry etch primer specifically formulated with zinc molybdate based corrosion inhibitor and is designed for use on aluminum, galvanized steel, and ferrous substrates to ensure good adhesion of subsequent primer coats. The wash primer itself is not intended to be used as a permanent protective coating.

 

Conformance: This product conforms to DOD-P-15328 Revision D. Conformance to previous spec MIL-P-15328 Revision C is also available.

DOD-P-15328 (Chromate Free)

Technical Data Sheet

 

IV) SINGLE PART ENAMELS:

 

TT-E-489: Enamel, Alkyd, Gloss, Low VOC Content

 

Description: Specification TT-E-489 covers an alkyd high gloss enamel suitable for use on primed exterior & interior wood and metal surfaces.

 

Conformance: This product conforms to TT-E-489 Revision J (the latest Revision).

 

TT-E-489

Technical Data Sheet

TT-E-516: Quick Drying, Styrenated Alkyd Type, Lusterless Enamel

 

Description: This lusterless enamel is a one component, quick air drying, alkyd based coating used as a finishing coat for ammunition and other metal surfaces.

 

Conformance: This product conforms to TT-E-516 Revision A (the latest Revision).

 

TT-E-516

Technical Data Sheet

TT-E-527: Lusterless, Low VOC, Alkyd Enamel

Description: This lusterless enamel is a one component, air drying alkyd based coating intended primarily for use on primed wood and metal surfaces as an exterior or interior finish coat for military and other special equipment. It is lead and chromate free.

 

Conformance: This product conforms to TT-E-527 Revision D (the latest Revision).

 

TT-E-527

Technical Data Sheet

TT-E-529: Semigloss, Low VOC, Alkyd Enamel

Description: This semi-gloss enamel is a single pack, air drying alkyd based coating intended primarily for use on primed wood and metal surfaces as an exterior or interior finish coat for military and other special equipment.

 

Conformance: This product conforms to TT-E-529 Revision G (the latest Revision).

 

TT-E-529

Technical Data Sheet

MIL-E-1115: Interior and Exterior Alkyd Enamel White Formula No. 30

 

Description: This enamel is intended for general purpose use on interior/exterior shipyard surfaces where fire-retardancy is not required. This product is suitable to be used on primed exterior & interior wood and metal surfaces where air pollution regulations apply.

 

Conformance: This product conforms to MIL-E-1115 Revision D.

 

MIL-E-1115

Technical Data Sheet

MIL-DTL-11195: HAPS Free, VOC Compliant, Fast Dry, Lusterless Enamel Ammunition Coating

 

Description: The coating covered by this specification is a one component, fast drying, lusterless, HAPS free, corrosion inhibiting alkyd enamel for use on primed metal substrates and on ammunition components.

 

Conformance: This product conforms to MIL-DTL-11195 Revision H (the latest Revision).

 

MIL-DTL-11195

Technical Data Sheet

MIL-DTL-15090: Enamel, Equipment, Light Gray (Navy Formula No. 111)

 

Description: The light gray semi-gloss enamel covered by this specification is an air dry, VOC compliant solvent base suitable for use as a topcoat on equipment, machinery, furniture and electrical equipment such as switchboard installations in marine service. This enamel is lead and chromate free and it may be applied by brush or spray and is suitable for any primed metal or wood structure. This product has a maximum VOC of 2.80 lbs/gal. or 340 g/l.

 

Conformance: This product conforms to MIL-DTL-15090 Revision D. Conformance to previous revisions of MIL-E-15090 are also available.

 

MIL-DTL-15090

Technical Data Sheet

MIL-E-16663: Semi-Gloss Enamel for Metal Surfaces of Ammunition and Ammunition Containers

 

Description: The coating covered by this specification is a single component, fast drying, semi-gloss, alkyd enamel specifically formulated for metal surfaces of ammunition and ammunition containers.

 

Conformance: This product conforms to MIL-E-16663 Revision A (the latest Revision).

 

MIL-E-16663

Technical Data Sheet

MIL-DTL-24607: Interior, Nonflaming (Dry), Chlorinated Alkyd Resin, Semigloss Enamel

 

Description: The paint covered by this specification is a high solids, VOC compliant, non-flaming (dry), semi-gloss finish. It is intended for application over previously, primed or painted surfaces of ships interior metal bulkheads. The dry paint film although degraded by heat, will not spontaneously burst into flame in the event of exposure to fire. The paint is not intended to prevent the burning of wood or other combustible substrates, but will retard combustion to a limited extent.

 

Conformance: This product conforms to MIL-DTL-24607 Revision B (the latest Revision). This data sheet can be used for certain previous revisions of MIL-DTL-24607 or DOD-E-24607.  Please contact us for details.

 

MIL-DTL-24607

Technical Data Sheet

MIL-PRF-24635: Coating Systems, Weather Resistant, Exterior Use

 

Description: This product is a high grade, air-dry, copolymerised silicone alkyd enamel that is the ultimate non-chalking finish coat.  It is a tough, resilient coating designed for exceptional exterior durability with superior gloss and color retention and is an ideal maintenance topcoat with good flexibility and intercoat adhesion.  It can be used on primed, smooth metal, glass reinforced plastic (GRP) wood and plastic/composite surface.

 

Conformance: This product conforms to MIL-PRF-24635 Type II, Revision E (the latest Revision). Conformance to previous revisions of MIL-PRF-24635 and MIL- E-24635 may be available. Contact us for details.

 

MIL-PRF-24635

Technical Data Sheet

V) HIGH TEMPERATURE RESISTANT PAINTS:

 

TT-E-490: Enamel, Silicone Alkyd Copolymer, Semigloss

 

Description: A single component, high performance, air-drying, silicone modified alkyd primer, interior/exterior finish intended for use on properly prepared metal. It withstands temperatures of 350ºF with peak to 450ºF. It cures via air or heat and it can be easily applied with brush, roller or spray to a very smooth finish.  The resultant finish is high heat and weather-resistant and exhibits prolonged durability and color retention compared to conventional alkyd coatings. It is recommended for use on marine surfaces above the water line, storage tanks, machinery & equipment. It can also be used on refinery equipment, heaters, stacks, breaching, furnaces, hot piping, process vessels, and heat exchangers.

 

Conformance: This product conforms to TT-E-490 Revision E (the latest Revision).

 

TT-E-490

Technical Data Sheet

TT-P-28: Paint, Aluminum, Heat Resisting

 

Description: A one component, pure silicone based pigmented finish specially designed to withstand 1000 ºF constant temperatures and intermittent 1200ºF exposure. This paint is lead and chromate free and contains no more than 2.8 lbs. per gallon (340 grams per liter) of volatile organic compounds (VOC) as applied.  When applying to bare metal, Simco HTR-7500 primer is required.

 

Conformance: This product conforms to TT-P-28, Revision G.

 

TT-P-28 (HTR-7502)

Technical Data Sheet

MIL-P-14105: Heat Resistant Paint for Steel Surfaces (Maximum: 1400 ºF)

 

Description: A one component, pure silicone based pigmented finish specially designed to withstand 1000 ºF constant temperatures and intermittent 1400ºF exposure.  This paint is Lead and Chromate Free and contains no more than 2.8 lbs. per gallon (340 grams per liter) of volatile organic compounds (VOC) as applied.  When applying to bare metal, Simco HTR-7500 primer is required.

 

Conformance: This product conforms to MIL-P-14105, Revision D

 

MIL-P-14105 (HTR-7504)

Technical Data Sheet

VI) VARNISHES:

 

TT-V-109 (MILVAR-831): Varnish, Interior, Alkyd Resin

 

Description: Our Milvar-831 (Conformance: TT-V-109) is a clear, air drying varnish of the alkyd resin  type and is intended for interior use, primarily as a transparent protective finish for wood. It serves as an undercoat for enamels when used on wooden construction and is also suitable for use as an aluminum vehicle.

 

Conformance: This product conforms to TT-V-109 Revision C (the latest Revision).

 

TT-V-109 (MILVAR-831)

Technical Data Sheet

TT-V-121 (MILVAR-833): Water-Resisting Spar Varnish

 

Description: This is a high solids, oil-soluble pure phenolic resin based spar varnish of excellent exterior durability and water resistance. It may be used as marine spar varnish for structural and architectural use. It dries to a smooth, lustrous, transparent finish. 

 

Conformance: This product conforms to TT-V-121 Revision H (the latest Revision).

 

TT-V-121 (MILVAR-833)

Technical Data Sheet

TT-V-119 (MILVAR-835): Varnish, Spar, Phenolic-Resin

 

Description: This is a high solids, oil-soluble, pure phenolic-resin based spar varnish of excellent exterior durability and water resistance.  It dries to a smooth, lustrous, and transparent finish. It is intended for use as a transparent and aluminized exterior protective finish coating for wood, metal and doped fabric.

 

Conformance: This product conforms to TT-V-119 Revision D (the latest Revision).

 

TT-V-119 (MILVAR-835)

Technical Data Sheet

TT-V-13750 (MILVAR-836): Varnish, Phenol-Formaldehyde, Clear and Aluminum Pigmented

 

Description: Milvar-836 is a tung oil based pure phenolic air drying clear or tinted varnish conforming to military specification MIL-V-13750B, Composition-G, Grade-A, Type-IV

 

Conformance: This product conforms to TT-V-13750 Revision B (the latest Revision).

 

MIL-V-16399 (MILVAR-837): Varnish, Moistureproof

 

Description: This is a high solids, oleoresinous based moisture proof varnish with excellent interior and exterior durability. It dries to a smooth, lustrous transparent hard finish. It is intended for use as a transparent exterior protective finish coating for wood and metal. Some Custom Colors are manufactured. Contact us for details.

 

Conformance: This product conforms to MIL-V-16399, Revision A (the latest Revision).

 

MIL-V-16399 (MILVAR-837)

Technical Data Sheet

MIL-V-173 (MILVAR-838): Varnish, Moisture and Fungus Resistant

 

Description: This is a high solids, oleoresinous based moisture and fungus resistant varnish with excellent interior and exterior durability. It dries to a smooth, lustrous transparent hard finish. It is intended for use as a transparent exterior protective finish coating for wood and metal.

 

Conformance: This product conforms to MIL-V-173, Revision C (the latest Revision).

 

MIL-V-173 (MILVAR-838)

Technical Data Sheet

AASHTO-M-69-70 (MILVAR-839): (MILVAR-839): Aluminum paint M-69 is based on an oleo-resinous water resisting spar varnish and leafing type Aluminum Paste. Type I is supplied in separate containers & Type II has the Aluminum Paste premixed in the
Varnish.

Conformance: This product conforms to the American Association of State Highway and Transportation Officials Specifications AASHTO M-69, Type-I or Type II.

AASHTO-M-69-70 (MILVAR-839)

Technical Data Sheet

TT-V-51 (MILVAR-840): Asphalt Varnish

 

Description: Asphalt varnish is formulated from specifically designed asphalt tiles such as gilsonite and treated drying oils.  It dries with a smooth, black, lustrous finish (similar to black enamel). The dried film of the varnish is resistant to water and lubricating oil. The coating is intended to meet all needs for a general utility asphalt varnish, suitable for both outside and inside exposure.  It is particularly suited for painting of indoor water and gas pipes.

 

Conformance: This product conforms to TT-V-51, Revision F (the latest Revision).

TT-V-51 (MILVAR-840)

Technical Data Sheet

 

VII) THINNERS:

 

TT-T-306: Thinner, Synthetic Resin Enamels. This specification covers a thinner for synthetic resin enamels.

 

Conformance: This product conforms to TT-T-306, Revision E (the latest Revision). Conformance to previous revisions of may be available. Contact us for details.

MIL-T-81772 TYPE I, II, & III: This specification covers the requirements for three types of thinner to be used in reducing marine and aircraft coatings.

These Thinners are furnished in the following types.

TYPE-I:             POLYURETHANE THINNER

TYPE-II:            EPOXY THINNER

TYPE-III:           ACRYLIC AND ALKYD THINNER

 

Conformance: This product conforms to MIL-T-81772, Type I, II or III Revision B (the latest Revision).

MIL-T-81772 Type I, II, & III

Technical Data Sheet

 

VIII) SPECIALTY PRODUCTS:

 

TT-P-320: Aluminum Pigment Paste for Paint

 

Description: Standard Grade Leafing Aluminum Paste is a medium sized flake paste with excellent moisture-barrier characteristics and has good reflectivity and hiding. It is the class most widely used especially on railroad coaches, bridges, storage tanks and general construction work.

 

Conformance: This product conforms to TT-P-320 Type II, Class B, Revision D (the latest Revision). Conformance to previous revisions of may be available. Contact us for details.

 

TT-P-320

Technical Data Sheet

MIL-C-10578 TYPE II: Corrosion Removing and Metal Conditioning Compound (Phosphoric Acid Base)

 

Description: This is a corrosion removing and metal conditioning compound which when diluted with water and applied to metal surfaces, will convert rust from ferrous metal surfaces and provide a slight etching action that promotes paint adhesion.

 

Conformance: This product conforms to MIL-C-10578 Type II, Revision D (the latest Revision).

MIL-C-10578 Type II

Technical Data Sheet

Anchor 2
Anchor 3
Anchor 4
Anchor 5
Anchor 6
Anchor 7
Anchor 8
Anchor 9
T-MIL-PRF-4556F
MIL-PRF-4556
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
T-MIL-PRF-4556F
bottom of page