(504) 393-9455

(866) 95-SIMCO

211 Gunther Ln, Belle Chasse, LA 70037, USA

©2017 BY SIMCO COATINGS INC.

MARINE & INDUSTRIAL PAINTS:

A.) PRIMERS

 

SIMPRIME-98: General Purpose Marine Primer

 

Description: A one component, multipurpose, lead and chromate free marine primer suitable for use on superstructures and steel surfaces not normally exposed to water immersion.

Available in: Gray Color

 

                     SIMPRIME-98

                     Technical Data Sheet

 

 

 

SIMPRIME-112: One Component, Multipurpose Red Oxide Marine Primer

 

Description: A one component, multipurpose, red oxide, lead and chromate free primer to be used on steel exposed to a normal or mildly corrosive environment. It is also suitable for use on superstructures and steel surfaces not normally exposed to water immersion.

Available in: Red Brown Color

                     SIMPRIME-112

                     Technical Data Sheet

 

SIMPRIME-138: One Component. High Performance Industrial & Marine Universal Primer

 

Description: A one component, fast-drying, high solids alkyd, non-lifting, corrosion inhibitive lead and chromate free primer. It is recommended to be used on just about any paintable surface as an under coater.  Also can be used for priming structural steel, bridge, metal roofing's and storage tanks in moderate chemicals environments. It is also suitable for use on superstructures and steel surfaces not normally exposed to water immersion. It can be used over alkyds to upgrade the painting system.

Available in: Gray & Red Brown Colors

                     SIMPRIME-138

                     Technical Data Sheet

 

ZINCGUARD-1502: Two Component, Zinc Rich Epoxy Primer

 

Description: A two component Organic Zinc Rich Epoxy Primer with high level (approx. 90%) of zinc dust by weight in the dry film. It has excellent cathodic protection against rust and undercutting.  It is recommended for chemical, power & water treatment plants, refineries, bridges, barges, ships, drilling rigs & paper mills.

Available in: Green Color

                     ZINCGUARD-1502

                     Technical Data Sheet

POLYGUARD-3002: Two Component , Epoxy Chromate Primer for Aluminum, Galvanized, & Steel Substrates

 

Description: A high performance two-component epoxy polyamide rust inhibitive primer designed to protect aluminum, galvanized, and steel substrates in a highly corrosive and chemically aggressive environments.  It has outstanding adhesion, water resistance and durability.

Available in: Green Color

                     POLYGUARD-3002

                     Technical Data Sheet

POLYGUARD-3003: Two Component, Epoxy Primer for Steel & Aluminum Substrates

 

Description: A high performance two component epoxy polyamide rust inhibitive primer designed to protect aluminum, galvanized, and steel substrates in a highly corrosive and chemically aggressive environments.  It has outstanding adhesion, water resistance and durability.

Available in: Red Brown Color

                     POLYGUARD-3003

                     Technical Data Sheet

SIMCHLOR 6004: One Component, Chlorinated Rubber Primer for Steel & Concrete Substrates

 

Description: Simchlor universal primer is a lead free, chlorinated rubber based, quick dry primer that can be recoated in one to two hours at 77 ºF or above. It is suitable to be used over steel and concrete substrates as primer/base coat

Available in: Light Gray & White Colors

                     SIMCHLOR 6004

                     Technical Data Sheet

 

B.) FINISH & INTERMEDIATE COATS

 

SIMLAC-700: One Component, Fast Dry Alkyd Gloss Industrial & Marine Enamel

 

Description: Simlac-700 is a one component, fast drying alkyd, gloss finish enamel designed for

economical exterior performance and protection. It is designed for application over alkyd primers and is recommended for industrial / offshore steel tools, and marine use above the water line.

Available in: White, Battleship Gray, Light Gray, Safety/Shell Yellow, Signal/Fire Red, & Black Colors. See Color Chart.

                     SIMLAC-700

                     Technical Data Sheet

SIMLUX-800: One Component, Alkyd Gloss Industrial & Marine Enamel

 

Description: Simlux-800 is a one component, alkyd, gloss finish enamel designed for

economical exterior performance and protection. It should be applied over alkyd primers. For marine use, it is suitable as a topcoat above the water line.

Available in: White, Deck Gray, Safety/Shell Yellow, National Blue, International Orange, & Black Colors. See Color Chart.

                     SIMLUX-800

                     Technical Data Sheet

SILVER-822: One Component, Ready Mixed, Aluminum Silver Industrial Alkyd Gloss Enamel

 

Description: Silver-822 is an aluminum / silver colored topcoat that produces a bright uniform appearance when used in large areas such as elevated water tanks and similar structures.  It gives excellent single coat coverage and has very good long term weathering properties and resistance to moisture and industrial fumes.

Available in: Aluminum / Silver Color

                     SILVER-822

                     Technical Data Sheet

ACRIGUARD-2355: One Component, Modified Acrylic Semigloss Finish

 

Description: Acriguard-2355 is a quick dry, modified acrylic topcoat. It provides a superior semigloss finish on steel, aluminum, and fiberglass substrates. It provides good color retention, is resistant to splash of mild chemicals, and has anti-mildew properties. It is often used for shipping containers. It should be used over Simco’s epoxy, acrylic, chlorinated rubber, or vinyl primers. It is recommended to be used as a finish coat for protection of steel, aluminum, and fiberglass in moderate to harsh environments. For marine applications, use above the water-line.

Available in: White, Osha Blue, Black, Deck Gray, Signal/Fire Red, Light Yellow, and Red Brown Colors. See Color Chart.

                     ACRIGUARD-2355

                     Technical Data Sheet

SIMGUARD-300: Two Component, Self-Priming, High Build Epoxy Finish

 

Description: A self-priming, high build epoxy polyamide coating that has excellent adhesion and outstanding resistance to acids, alkalis and petroleum solvents. It can be used as a self-priming coating system over marine fiberglass and steel vessels both above and below the waterline. It is an excellent primer / topcoat for marine decks. It can also be used on structural steel, offshore structures, and the interior and exterior portions of tanks. It has outstanding resistance to sour crudes, hydrogen sulfide and salt water. It is not recommended for use with ketones, esters or chlorinated hydrocarbons.

Available in: White, Deck Gray, Black, Battleship Gray, Safety/Shell Yellow, and Red Brown Colors. See Color Chart.

 

                     SIMGUARD-300

                     Technical Data Sheet

SIMGUARD-2120: Two Component, High Build Epoxy Mastic Finish

 

Description:   A two component, low VOC, high build (12 – 15 mil DFT/coat), refined bleached tar epoxy coating.  It is used as rust preventive coating for long-term protection to marine & industrial structures exposed to corrosive environments.  It exhibits excellent resistance to impact, abrasion and chemical attack.  It is compatible with a wide range of primers, but is also self- priming and can be applied to prepared steel or concrete surfaces.

Available in: White, Deck Gray, & Black Colors

                     SIMGUARD-2120

                     Technical Data Sheet

 

SIMTAR-209: Two Component, High Build Coal Tar Epoxy

 

Description: A specially formulated anti corrosive coal tar epoxy designed to protect metal and concrete from deterioration and mechanical damage in a wide range of environmental conditions.  It is suitable for use in a variety of immersion applications including: ship hulls, marine docks, offshore piling, oil refining, and sewerage treatment plants.

                     SIMTAR-209

                     Technical Data Sheet

SIMCHLOR-650: One Component Chlorinated Rubber Based Finish For Swimming Pools

 

Description: A high performance Chlorinated Rubber based coating specifically formulated to withstand continuous water submersion and the effects of wear and weather. It is recommended for use on large steel or concrete municipal, hotel / motel and other public swimming pools, decks, walking surfaces, reflection basins, garden and lily ponds.

Available in: Blue & Off White Colors

 

Conformance: This product conforms to Federal Specification TT-P-95C Type I, Class-I, Chlorinated Rubber Swimming Pool Paint.

                     SIMCHLOR-650

                     Technical Data Sheet

SOLOKOTE-2500: One Component Chlorinated Rubber Primer / Finish for Shipping Containers

 

Description: SoloKote 2500 is a quick dry, semi-gloss, high build, one component chlorinated rubber primer / finish coating with anti-corrosive pigments designed for use directly over metal substrates.  It is resistant to wear and impact, sea water splash, and salt air exposure.  It has excellent touch up and repair properties. It is recommended in cargo holds and shipping containers and as a single coat system for steel & aluminum structures above and below waterline and in an industrial environment.

                     SOLOKOTE-2500

                     Technical Data Sheet

SIMTHANE-902: Two Component, High Performance Polyurethane

 

Description: A two component, acrylic/aliphatic polyurethane finish which cures to a very hard, high gloss, flexible coating with outstanding color retention.  This coating has exceptional resistance to weathering and severe environment.  It is used for exterior or interior applications wherever a superior gloss and color retention finish is desired, such as storage tanks, structural steel, pipelines, production equipment and offshore platforms etc.

Available in: White, Deck Gray, Black, & Safety/Shell Yellow Colors

                     SIMTHANE-902

                     Technical Data Sheet

 

C.) HIGH TEMPERATURE PAINTS

 

HTR-7002: One Component, Heat Resistant, Silicone Modified Primer (Max Temp. 450 ºF)

 

Description: A single component, high performance, air-drying, silicone modified alkyd primer, interior/exterior finish intended for use on properly prepared metal. It withstands temperatures of 350ºF with peak to 450ºF. It cures via air or heat and it can be easily applied with brush, roller or spray to a very smooth finish.  The resultant finish is heat and weather-resistant and exhibits prolonged durability and color retention compared to conventional alkyd coatings. It is recommended for use on marine surfaces above the water line, storage tanks, machinery & equipment. It can also be used on refinery equipment, heaters, stacks, furnaces, hot piping, process vessels, and heat exchangers.

Available in Gray Color

 

                     HTR-7002

                     Technical Data Sheet

HTR-7004: One Component Heat Resisting Silicone Modified Aluminum Paint

 

Description: A single component, high performance, air-drying, silicone modified alkyd primer, interior/exterior finish intended for use on properly prepared metal. It withstands temperatures of 350ºF with peak to 450ºF. It cures via air or heat and it can be easily applied with brush, roller or spray to a very smooth finish.  The resultant finish is highly heat and weather-resistant and exhibits prolonged durability and color retention compared to conventional alkyd coatings. It is recommended for use on marine surfaces above the water line, storage tanks, machinery & equipment. It can also be used on refinery equipment, heaters, stacks, breaching, furnaces, hot piping, process vessels, and heat exchangers.

Available in: Silver / Aluminum Color

                     HTR-7004

                     Technical Data Sheet

HTR-7500: One Component Heat Resistant Primer for Steel Surfaces

 

Description: HTR-7500 is a single component, pigmented pure silicone primer that may be applied while equipment is operating. HTR-7500 High Heat Primer will accommodate 750ºF temperatures; however, when over coated with HTR "Pure" Silicone Topcoat, the system endures constant heat of 1,000ºF and intermittent to 1,200ºF.

Available in: Gray Color

 

                     HTR-7500

                     Technical Data Sheet

HTR-7502: One Component Heat Resistant Paint for Steel Surfaces (Max Temp.: 1200ºF)

 

Description: A single pack pure silicone based pigmented finish specially designed to withstand 1000ºF constant temperatures and intermittent 1200ºF exposure. 

This paint is lead and chromate free and contains no more than 3.5 lbs. per gallon (420 grams per liter) of volatile organic compounds (VOC) as applied.  When applying to bare metal, Simco HTR-7500 primer is required.

Available in: Silver / Aluminum Color

                     TT-P-28 (HTR-7502)

                     Technical Data Sheet

HTR-7504: One Component Heat Resistant Paint for Steel Surfaces (Max Temp.: 1200ºF)

 

Description: A single pack pure silicone based pigmented finish specially designed to withstand 1000ºF constant temperatures and intermittent 1200ºF exposure. This paint is lead and chromate free and contains no more than 3.5 lbs. per gallon (420 grams per liter) of volatile organic compounds (VOC) as applied. When applying to bare metal, Simco HTR-7500 primer is required.

Available in: Black & some customs colors.

                     MIL-P-14105 (HTR-7504)

                     Technical Data Sheet

 

D.) ANTIFOULING & BOTTOM PAINTS

 

50-3: Vinyl High Load Copper Antifouling Paint

 

Description: A physical drying long life antifouling based on vinyl resin and a high content of cuprous oxide biocide that prevents marine growth on ships in cold water areas to subtropical ports. It prevents settlement of bacterial, shell and weed fouling for prolonged periods.  It can protect for approximately 30 months when two coats (3.0 mil. each) of the paint are applied according to Simco’s method of application with Simco’s recommended primers. It is recommended for use on fish and seafood boats, barges, ships and drilling vessels.  It should not be used on boats that are taken out of the water often, as the effectiveness of the anti-foulant decreases when removed from water. It is suitable for steel, and fiberglass substrates.

Available in: Blue, Red Brown, & Black Colors

 

                     50-3

                     Technical Data Sheet

 

E.) SPECIALTY PRODUCTS

 

WAVEGUARD-3000:  Splash Zone Compound (Underwater Epoxy Patching Compound)

 

Description: Waveguard-3000 is a two component solvent free epoxy patching compound specifically developed for application to either dry or wet surfaces. It adheres to wet substrates and cures rapidly both in air or while immersed in fresh or salt water. It protects against costly damage due to impact and abrasion from work boats, debris and ice. It is recommended to seal small holes / cracks in boats, and is recommended to arrest corrosion in splash zone areas of bulkheads, pilings, bridge abutments, drilling rigs, water and sewerage treatment tanks and other marine structures. This product should not be applied at temperatures less than 60ºF.

Available in: Olive Green Color (Yellow & Black Components are mixed together)

 

                     WAVEGUARD-3000

                     Technical Data Sheet

 

 

SIMGLO-440: High Performance Fluorescent Enamel

 

Description: Simglo-440 is an alkyd based premium fluorescent paint. It is made from daylight fluorescent pigments and an organic resin. Simglo-440 can be used on steel and fiberglass substrates that require a high visibility paint such as aircraft, navigational aids, safety marking, fire protection, traffic control, boats, buoys, docks, and life-saving equipment. It can be used for outdoor advertising signs, painted bulletins, store signs, truck signs, and trade exhibits.

Available in: Fluorescent Red / Orange Colors

 

                     SIMGLO-440

                     Technical Data Sheet

POLYTUFF-2501: One Component Polyurethane Finish for Wood Surfaces, and Gym Floors

 

Description: Polytuff-2501 is a single component, high gloss, fast drying polyurethane providing a unique combination of excellent hardness, toughness, mar & abrasion resistance and long term durability.  It has outstanding color and gloss retention and conforms to air pollution rules and regulation. It is recommended as a clear finish on container & gym floors, wood and metal furniture.

                     POLYTUFF-2501

                     Technical Data Sheet