(504) 393-9455

(866) 95-SIMCO

211 Gunther Ln, Belle Chasse, LA 70037, USA

©2017 BY SIMCO COATINGS INC.

CONFORMANCE PAINTS:

I) CORPS OF ENGINEERS SPEC. PAINTS:

 

V-102e: Vinyl Type Ready Mixed Aluminum Paint 

 

Description: An aluminum pigment/paste vinyl coating that is used for painting hydraulic structures and appurtenant works.

 

Conformance: This product conforms to U.S. Corps of Engineers Formula V-102e. 

                   V-102e

                   Technical Data Sheet

 

 

 

V-103c: Black Pigmented Vinyl Paint

 

Description: A black pigmented vinyl paint that is mostly used for painting hydraulic structures and appurtenant works.

 

Conformance: This product conforms to U.S. Corps of Engineers Formula V-103c.

 

                   V-103c

                   Technical Data Sheet

V-766e: Vinyl Type White or Gray Paint

 

Description: A vinyl type white or gray paint that is mostly used for painting hydraulic structures and appurtenant works.

 

Conformance: This product conforms to U.S. Corps of Engineers Formula V-766e.

 

                   V-766e

                   Technical Data Sheet

VZ-108d: Vinyl Type Zinc Rich Primer

 

Description: A 3-component metallic zinc dust vinyl primer that is mostly used for painting hydraulic structures and appurtenant works.

 

Conformance: This product conforms to U.S. Corps of Engineers Formula VZ-108d.

 

                   VZ-108d

                   Technical Data Sheet

C-200 (Simtar-200): A Two Component High Build Coal Tar Epoxy Paint:

 

Description: Our Simtar-200 is a self-priming, two component, high build coal tar epoxy.  It has excellent adhesion & abrasion resistance. It can be used on marine docks, ship hulls, pipelines interior & exterior, marine barges (exterior), and metal protection in most chemical and saltwater environments. It provides 16.0 mils. DFT protection with two coats.

Conformance: This product conforms to U.S. Corps of Engineers formula C-200 and the steel structures painting council No. 16 specification.

 

                   C-200 (Simtar-200)

                   Technical Data Sheet

MIL-DTL-24441 Type III & Type IV: Epoxy Polyamide Paint

 

Description: This specification covers a series of primers & paints that are epoxy polyamide, two component, and lead and chromate free. They are recommended to be used for painting both land and marine structures and protect structures from environmental attack.

 

Conformance:  This product conforms to MIL-DTL-24441 Revision D (the latest revision). 

MIL-DTL-24441 Formula 150 Type III

                   MIL-DTL-24441 Formula 150 Type III

                   Technical Data Sheet

  

MIL-DTL-24441 151 – 158 Type III

                   MIL-DTL-24441 151 – 158 Type III

                   Technical Data Sheet

 

 

 

MIL-DTL-24441 159 Type III

                   MIL-DTL-24441 159 Type III

                   Technical Data Sheet

MIL-DTL-24441 150 Type IV

                   MIL-DTL-24441 150 Type IV

                   Technical Data Sheet

 

 

 

MIL-DTL-24441 151-162 Type IV

 

                   MIL-DTL-24441 151-162 Type IV

                   Technical Data Sheet

 

II) STEEL STRUCTURES PAINTING COUNCIL (SSPC) PAINTS:

 

SSPC PAINT #16: (Simtar-200): A 2-component High Build Coal Tar Epoxy Paint:

 

Description: Our Simtar-200 is a self-priming, two component, high build coal tar epoxy.  It has excellent adhesion & abrasion resistance. It can be used on marine docks, ship hulls, pipelines interior & exterior, marine barges (exterior), and metal protection in most chemical and saltwater environments. It provides 16.0 mils. DFT protection with two coats.

 

Conformance: This product conforms to U.S. Corps of Engineers formula C-200 and the steel structures painting council No. 16 specification.

 

                   SSPC Paint #16

                   Technical Data Sheet

SSPC PAINT #20: Organic Zinc Rich Primer, Type II

 

Description: This epoxy polyamide, two component, zinc rich coating has excellent rust preventative properties in adverse or chemically polluted atmospheres. It is easy to apply by airless spray up to 6.0 mils (150 Microns) dry film thickness. It has good adhesion properties on sandblasted steel where a hard durable chemical resistant nonporous coating is desired. Other properties include excellent water and weather resistance for interior and exterior use, and strong impact resistance.

 

Conformance: This product conforms to the specific composition and performance requirement of Steel Structures Painting Council (SSPC) Paint Specification No. 20, Type-II (Organic).

 

                   SSPC Paint #20

                   Technical Data Sheet

 

SSPC PAINT #22: Epoxy Polyamide Intermediate & Finish Coat

 

Description: The coating supplied under this specification is a two part epoxy polyamide product composed of a base component and curing agent component. When the two components are mixed in proper proportions, the coating is capable of curing at temperatures as low as 50 ºF (10 ºC) properties. It can be used as an intermediate coating over primed structural steel, offshore structures, chemical plants, refineries, barges & bridges. A topcoat is also available to be used over the intermediate coat.

 

Conformance: This product conforms to the specific composition and performance requirement of Steel Structures Painting Council (SSPC) Paint Specification No. 22.

 

                   SSPC Paint #22

                   Technical Data Sheet

SSPC PAINT #25: Corrosion Inhibiting Alkyd Primer Oxide Red

 

Description: One component lead & chromate free, VOC compliant, corrosion inhibiting alkyd primer based on anticorrosive pigments and synthetic iron oxide. It can be used as a shop primer, field primer, or maintenance primer on structural steel substrates exposed to moderate corrosive environments.

 

Conformance: This product conforms to the specific composition and performance requirement of Steel Structures Painting Council (SSPC) Paint Specification No. 25.

                   SSPC Paint #25

                   Technical Data Sheet

 

LOUISIANA DEPARTMENT OF TRANSPORTATION & DEVELOPMENT PAINTS:

 

BRIDGE COATING SYSTEM (DOTD SPEC. MS-285-003, 4/91)

 

DOTD STOCK NO.                   DESCRIPTION

 

18-03-2010                  Primer, first coat, corrosion inhibitive alkyd paint.

                                       Contact us for more information.

 

18-03-2020                  Primer, second/intermediate coat, corrosion inhibitive alkyd paint.

                                       Contact us for more information.

 

18-03-2030                  Topcoat, aluminum vehicle w/paste, AASHTO designation M-69, Type I

                                       Contact us for more information.