Simco Coatings Inc.
211 Gunther Ln.
Belle Chasse, LA 70037
Office: 504.393.9455
Toll-Free: 866.95.SIMCO
Fax: 504.433.1406
For more information or purchase request
Email: sales@simcocoatings.com
Legal/Privacy Info.
|
|
TT-E-529
ALKYD ENAMEL FINISH
Description:
This semi-gloss enamel is a single pack, air drying alkyd based coating intended primarily for use on primed wood and metal surfaces as an exterior or interior finish coat for military and other special equipment. It is also used for direct application to bare metal substrates such as metal office furniture and lockers which have been prepared for painting according with Type-I or III of TT-C-490.
Conformance:
In compliance with Federal Specification TT-E-529, Type-I, suitable for
brush or spray application.
Technical Data
| Generic Type: |
Medium oil alkyd |
|
| Color and Finish: |
As per Fed-STD-595 Colors, Semi-gloss Finish |
|
| Flash Point: |
41º C (105º F) |
|
| Percent Volume Solids: |
44-46% (Varies by color) |
|
| Solids by Weight: |
60-65% (Varies by color) |
|
| Volatile Organic Compounds (VOC): |
3.6 Lbs./Gallon (435 Grams/Liter) |
|
| Recommended DFT: |
1.5-2.0 Mils/Coat |
|
| Theoretical Coverage @ 2 Mil: |
Approx. 350 Sq. Ft./Gallon |
|
| Spreading Rate: |
750 sq. ft |
|
| Recommended Thinner: |
Mineral Spirits |
|
| Shelf Life: |
1 year |
|
| Drying Time @ 77º F: |
|
|
|
|
| To touch: |
2 hrs. |
|
|
|
| To dryhard: |
8 hrs. |
|
|
|
| To full hardness: |
72 hrs. |
|
|
|
Safety Precautions:
(A) Use normal precautions such as gloves, facemasks.
(B) Adequate ventilation must be maintained.
(C) Explosion proof lights & electrical equipment.
(D) Non-Sparking shoes & tools for workers in area.
(E) This product contains flammable materials. Forbid all flames, smoking and welding in work area.
(F) Avoid breathing of vapor, contact with skin or eyes. If product comes in contact with skin or eyes, wash thoroughly with water and obtain medical attention.
Non-Warranty:
The technical data listed herein has been compiled for your convenience and guidance, and is based upon our experience and knowledge. However, since we have no control over the use of this information of this product, no warranty expressed or implied, is intended or given. Simco Coatings, Inc. assumes no responsibility whatsoever for coverage, performance, or any other damages, including injuries resulting from use of this information or of products recommended herein.
|
|
