Simco Coatings Inc.
211 Gunther Ln.
Belle Chasse, LA 70037
Office: 504.393.9455
Toll-Free: 866.95.SIMCO
Fax: 504.433.1406
For more information or purchase request
Email: sales@simcocoatings.com
Legal/Privacy Info.
|
|
SILKYD ENAMEL-7001
Description:
A single component, high performance, air-drying, 30% silicone modified alkyd enamel, semi gloss, interior/exterior finish intended for use on properly prepared and primed metal. Can be easily applied with brush, roller or spray to a very smooth finish. The resultant finish is highly weather-resistant and exhibits excellent gloss and color retention compared to conventional alkyd coatings.
Principle Features:
|
Marine surfaces above the water line. |
|
|
Storage tanks, machinery & equipment, etc. |
|
|
Refinishing trucks, buses, passenger and railroad tank cars. |
|
|
Upgrading conventional systems. |
|
Conformance: TT-E-490E
Technical Data
| Generic Type: |
Silicone alkyd topcoat |
|
| Color and Finish: |
Various; semi gloss |
|
| Flash Point: |
95º F |
|
| Theoretical Coverage @ 2.0 mil DFT: |
380 sq. ft. approx. varies w/ color |
|
| Temperature Resistance: |
350º F |
|
| VOC: |
3.60 Lbs./Gal. or 431.84 Gram/Ltr |
|
| Drying Time @ 75º F: |
|
|
|
|
| To touch: |
2 hours |
|
|
|
| To handle: |
8 hours |
|
|
|
| To topcoat: |
24 hours |
|
|
|
| Volume Solids: |
48.0% average, depend. on color |
|
| Recommended DFT: |
2.0 mils |
|
| Shelf Life: |
12 months |
|
| Shipping Weight: |
|
1 Gal. |
5 Gal. |
|
|
|
10.7 lbs. |
54.0 lbs. |
|
| Recommended Thinner: |
Mineral Spirits |
|
Surface Preparation:
This product is designed to be applied over blasted or primed steel. Ensure that the surface is free form contaminants.
Application:
Can be applied by conventional spray, brush or a roller. Mix the product thoroughly before use. Thin up to 5% with mineral spirits if required for work ability.
Safety Precautions:
(A) Use normal precautions such as gloves, facemasks.
(B) Adequate ventilation must be maintained.
(C) Explosion proof lights & electrical equipment.
(D) Non-Sparking shoes & tools for workers in area.
(E) This product contains flammable materials. Forbid all flames, smoking and welding in work area.
(F) Avoid breathing of vapor, contact with skin or eyes. If product comes in contact with skin or eyes, wash thoroughly with water and obtain medical attention.
Non-Warranty:
The technical data listed herein has been compiled for your convenience and guidance, and is based upon our experience and knowledge. However, since we have no control over the use of this information of this product, no warranty expressed or implied, is intended or given. Simco Coatings, Inc. assumes no responsibility whatsoever for coverage, performance, or any other damages, including injuries resulting from use of this information or of products recommended herein.
|
Copyright © 2001-2006 Simco Coatings Inc. All rights reserved.
|
| |
