Simco Coatings Inc.
211 Gunther Ln.
Belle Chasse, LA 70037
Office: 504.393.9455
Toll-Free: 866.95.SIMCO
Fax: 504.433.1406
For more information or purchase request
Email: sales@simcocoatings.com
Legal/Privacy Info.
|
|
FRP# 24607
(FLAME RETARDING PAINT)
Description:
It is an oil based, non-flaming (dry), semi gloss paint which has been specifically formulated to provide a decorative coating or dry film which, although degraded by heat, will not spontaneously burst into flames in the event of exposure to fire. The paint is not intended to prevent the burning of wood or other combustible substrates, but will retard combustion to a limited extent.
Conformance:
It conforms to Federal Specifications DOD-E-24607
Technical Data
| Color & Finish: |
White; semi gloss |
|
| Solids by Volume: |
50.0 ± 1.0% |
|
| Weight per Gallon |
14.50 ± 0.2 |
|
| Flash Point: |
100ºF |
|
| Theoretical Coverage @ 2 mil DFT: |
Approx.300 sq. ft./gallon |
|
| VOC: |
3.40 lbs. / gallon or 400 grm./litre |
|
| Drying Time Hours @ 75ºF: |
|
|
|
|
| To touch: |
2-3 hours |
|
|
|
| Dry hard: |
6-8 hours |
|
|
|
| Recommended Thinner |
T-100 Thinner |
|
Surface Preparation:
Surface must be clean, dry and free of oil, grease, rust or other foreign matter.
Application:
Comes ready for Brush, Roller application. For spray, thin as needed up to 1 pint per gallon with T-100 Thinner.
Safety Precautions:
(A) Use normal precautions such as gloves, facemasks.
(B) Adequate ventilation must be maintained.
(C) Explosion proof lights & electrical equipment.
(D) Non-Sparking shoes & tools for workers in area.
(E) This product contains flammable materials. Forbid all flames, smoking and welding in work area.
(F) Avoid breathing of vapor, contact with skin or eyes. If product comes in contact with skin or eyes, wash thoroughly with water and obtain medical attention.
Non-Warranty:
The technical data listed herein has been compiled for your convenience and guidance, and is based upon our experience and knowledge. However, since we have no control over the use of this information of this product, no warranty expressed or implied, is intended or given. Simco Coatings, Inc. assumes no responsibility whatsoever for coverage, performance, or any other damages, including injuries resulting from use of this information or of products recommended herein.
|
|
|
|
|
